Search results for "Critical heat flux"
showing 10 items of 13 documents
Hydraulic assessment of an upgraded pipework arrangement for the DEMO divertor plasma facing components cooling circuit
2021
Abstract In the context of the Work Package DIVertor (WPDIV) of the EUROfusion action, a research campaign has been carried out by University of Palermo in cooperation with ENEA to assess the thermal-hydraulic performances of the DEMO divertor cooling system, concentrating the attention on its 2019 Plasma Facing Components (PFCs) configuration, relevant to DEMO baseline 2017. The research activity has been performed following a theoretical-numerical technique based on the finite volume method and adopting the well-known ANSYS CFX CFD code. The PFCs cooling circuit thermal-hydraulic performances under nominal steady-state conditions, assessed mainly in terms of coolant total pressure drop, c…
Study of a water-cooled convective divertor prototype for the DEMO fusion reactor
2000
The plasma facing components of a fusion power reactor have a large impact on the overall plant design, its performance and availability and on the cost of electricity. The present work concerns a study of feasibility for a water-cooled prototype of the convective divertor component of the DEMO fusion reactor. The study has been carried out in two steps. In the first one thermal-hydraulic and neutronic parametric analyses have been performed to find out the prototype optimized configuration. In the second step thermo-mechanical analyses have been carried out on the obtained configuration to investigate the potential and limits of the proposed prototype, with a particular reference to the ma…
Steady state and transient thermal–hydraulic analyses on ITER divertor module
2005
Abstract One of the most challenging components of ITER is the divertor devoted at controlling the characteristics of the plasma boundary, exhausting the α particles and reducing the impurities in the plasma. The thermal–hydraulic design of the divertor is particularly, demanding because of the high heat loads and the cooling flow margin in the plasma-facing components (PFCs). The pressure drop is limited by the pumping power and also avoiding the risk of reaching critical heat flux (CHF). Furthermore, for maintenance operation foreseen, each single divertor cassette should be drained and dried before withdrawing it out from the vacuum vessel. To address these requirements, European Fusion …
On the numerical assessment of the thermal-hydraulic operating map of the DEMO Divertor Plasma Facing Components cooling circuit
2020
Abstract Within the framework of the Work Package DIV 1 - “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by University of Palermo and ENEA to investigate the thermal-hydraulic behaviour of the DEMO divertor cassette cooling system, focussing the attention on the 2018 configuration of the Plasma Facing Components (PFCs) circuit consistent with the DEMO baseline 2017. The research campaign has been carried out following a theoretical-computational approach based on the finite volume method and adopting the commercial Computational Fluid-Dynamic (CFD) code ANSYS CFX. A steady-state CFD analysis has been carried out for the …
The inclination effect on the performance of water-filled heat pipes
1991
Abstract Heat pipes have been used in wide ranges of applications today including solar engineering. During this research study, the inclination dependent performance of water filled heat pipes was investigated both theoretically and experimentally for solar energy applications. The results showed that the performance of water-filled heat pipes are strongly dependent on the inclination and the heat source temperatures. As a general result, the heat transfer capability of water filled heat pipes is reduced dramatically below a 45° tilt angle.
Influence of Skin Depth on Convective Heat Transfer in Induction Heating
2017
International audience; We investigate convection driven by induction heating of a horizontal fluid layer using direct numerical simulations (DNS). This problem is of particular interest in the context of nuclear severe accident mastering. In a real severe accident, the molten core is subjected to homogeneous internal sources resulting from nuclear disintegrations. This situation is mimicked in the laboratory using induction heating as the internal source. In induction heating, however, heat sources are localized in the skin layer. Consequently, this concentration of heat may modify the flow and wall heat transfer compared to the case of homogeneous internal sources. DNS are carried out for…
Heat Conduction Problem for Double-Layered Ball
2014
Heat conduction models for double layered spherical sample are developed. Parabolic (classic, based on Fourier’s Law) and hyperbolic (based on Modified Fourier’s Law) heat conduction equations are used to describe processes in the sample during Intensive Quenching. Solution and numerical results are obtained for 1D model using Conservative Averaging method and transforming the original problem for a sphere to a new problem for a slab, with non classic boundary condition. Models include boundary conditions of third kind and non-linear BC case. Numerical results are presented for several relaxation time and initial heat flux values.
A Photographic study of subcooled flow boiling burnout at high heat flux and velocity
2007
Abstract The present paper reports the results of a visualization study of the burnout in subcooled flow boiling of water, with square cross section annular geometry (formed by a central heater rod contained in a duct characterized by a square cross section). The coolant velocity is in the range 3–10 m/s. High speed movies of flow pattern in subcooled flow boiling of water from the onset of nucleate boiling up to physical burnout of the heater are recorded. From video images (single frames taken with a stroboscope light and an exposure time of 1 μs), the following general behaviour of vapour bubbles was observed: when the rate of bubble generation is increasing, with bubbles growing in the …
Investigation of the Cooling of Hot Walls by Liquid Water Sprays
1999
An experimental study was conducted for the heat transfer from hot walls to liquid water sprays. Four full cone, swirl spray nozzles were used at different upstream pressures, giving mass fluxes impinging on the wall, G, from 8 to 80 kg m(-2) s(-1), mean droplet velocities, U, from 13 to 28 m s(-1) and mean droplet diameters, D, from 0.4 to 2.2 mm. A target consisting of two slabs of beryllium-copper alloy, each 4 x 5 cm in size and 1.1 mm thick, was electrically heated to about 300 degrees C and then rapidly and symmetrically cooled by water sprays issuing from two identical nozzles. The midplane temperature was measured by a fast response, thin-foil thermocouple and the experimental data …
On the thermal-hydraulic optimization of DEMO divertor plasma facing components cooling circuit
2018
Abstract Within the framework of the Work Package Divertor, Subproject: Cassette Design and Integration (WPDIV-Cassette) of the EUROfusion action, a research campaign has been jointly carried out by ENEA and University of Palermo to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. Attention has been focussed on the divertor Plasma Facing Components (PFCs) cooling circuit and a parametric analysis has been carried out in order to assess the potential impact of proper layout changes on its thermal-hydraulic performances, mainly in terms of coolant total pressure drop, flow velocity distribution and margin against critical heat flux occurrence. The r…